Airsoft Filling station for HPA tanks EPeS Airsoft

GyártóEPeS Airsoft

TermékkódEP-042-B

Kategóriák HPA Adapterek

Elérhetőség Elfogyott

Expedíció Jelenleg nincs raktáron ez a termék. Kattintson az Értesítés az elérhetőségről e-mailben lehetőségre, és értesítjük, amint az áru elérhetővé válik.

Filling station for HPA bottles from the manufacturer EPeS Airsoft for DIN screws.

How to use the station: Simply screw the station on the large air tank's output valve thread and tighten the nut on the station by hand. Then connect the HPA tank to the station's output quick connector, and slowly open the output valve on the large air tank. If the HPA tank is filled too fast, it will start to heat up significantly. Therefore, the output valve has to be operated gently. Even if you fill the HPA tank slowly, it will still warm up. The pressure will drop as it cools down. It is recommended to let the tank sit and rest for several tens of minutes and then fill to the required pressure.
Súly: 350g

Leírás

Filling station for HPA bottles from the manufacturer EPeS Airsoft for DIN screws.

How to use the station: Simply screw the station on the large air tank's output valve thread and tighten the nut on the station by hand. Then connect the HPA tank to the station's output quick connector, and slowly open the output valve on the large air tank. If the HPA tank is filled too fast, it will start to heat up significantly. Therefore, the output valve has to be operated gently. Even if you fill the HPA tank slowly, it will still warm up. The pressure will drop as it cools down. It is recommended to let the tank sit and rest for several tens of minutes and then fill to the required pressure.
Technikai paraméterek