Egyenes tömlő - 90cm - külső menet

GyártóEPeS Airsoft

TermékkódE022-90

Kategóriák HPA fegyver alkatrészek

Elérhetőség Elfogyott

Expedíció Jelenleg nincs raktáron ez a termék. Kattintson az Értesítés az elérhetőségről e-mailben lehetőségre, és értesítjük, amint az áru elérhetővé válik.

A straight high-pressure hose for HPA systems with 1/8 NPT threads on both ends. Available in 60/90/130cm length.
- Operating pressure up to 900 psi
- The hose is fitted with 1/8 NPT threads on both ends.
- Straight hose in black color
- Hose made from composite with steel end fittings
- Package contains 1 hose
This hose is primarily intended for the distribution of the output high pressure directly from the HPA tank. For this reason, the inner diameter is smaller, which results in lower flow. Therefore, it is not suitable for connecting high-airflow-demand HPA systems to a regulator (Daytona or some EPS – solenoid systems). It can be used, for example, when you need to place the regulator to a location other than directly on an HPA tank.
Súly: 20g

Leírás
A straight high-pressure hose for HPA systems with 1/8 NPT threads on both ends. Available in 60/90/130cm length.
- Operating pressure up to 900 psi
- The hose is fitted with 1/8 NPT threads on both ends.
- Straight hose in black color
- Hose made from composite with steel end fittings
- Package contains 1 hose
This hose is primarily intended for the distribution of the output high pressure directly from the HPA tank. For this reason, the inner diameter is smaller, which results in lower flow. Therefore, it is not suitable for connecting high-airflow-demand HPA systems to a regulator (Daytona or some EPS – solenoid systems). It can be used, for example, when you need to place the regulator to a location other than directly on an HPA tank.
Technikai paraméterek