Redline N7 Gen2 is HPA's patented cylinder exchange system. It is an updated version of the legendary N7 system. The very first HPA engine with a single solenoid and a true closed bolt. Like the original N7 engine, the N7 Gen-2 uses a single solenoid, has a forward shifted nozzle, and fires from a true closed bolt. The most significant change from the original N7 motor is the removal of the external air line to the nozzle. We have also updated the internal components and slightly reduced the size of the air chamber. Functionally, however, it is identical to the original N7. This means you get the same great performance and easy setup that the original N7 engines were known for.

With a truly closed breech design and an air-balanced return nozzle, the N7 Gen-2 is a step up from the typicalm HPA open-threaded motor, it is much more consistent in seating the bullet in the cartridge case from shot to shot. This results in more consistent velocity from shot to shot, tighter grouping, and greater accuracy at distance compared to open-screw HPA motors.

Like the original N7, the N7 Gen-2 uses a mechanically sealed, ejection chamber. Rather than relying on solenoid control of the volume of air used to drive the ball, the N7 Gen-2 fills the internal air chamber with pressure set by an external user-adjusted supply regulator.

When fired, this air chamber is mechanically closed off from the supply and the contents of the chamber are released into the barrel to propel the bullet. This feature contributes to the N7 Gen-2's excellent shot consistency while avoiding wasted air due to improper flow adjustment. The N7 Gen-2 is very easy to set up. Since there is no poppet dwell to adjust, just set the feed regulators output pressure to match the desired joules and you are good to go. The correct amount of air is needed for each shot regardless of bullet weight, barrel length or any other factor.

The Ver-3 kit comes with a G&G AK nozzle. This nozzle works for most TM compatible AKs.

The maximum inlet pressure is 120 psi.

The FCU is programmable for:

1: Nozzle dwell length.
2: Semi-automatic maximum rate of fire
3: Fully automatic mode / Burst mode
4: Fully automatic rate of fire
5: Anti Stiction Pulse
6: Selector position

N7 Gen-2, Basic Features:

• HPA cylinder replacement with single solenoid.
• Very simple setup. Most people just install and play without the need for FCU tuning.
• Easy hop tuning due to the truly closed screw design.
• Fixed size discharge chamber design means no poppet tuning required.
• Can be converted from electro-pneumatic to fully mechanical/pneumatic with the optional conversion kit.
• Less "joule creep" than typical HPA motors.
• 100% designed and manufactured in the USA

Weight: 160g