GyártóEPeS Airsoft
TermékkódEP-103
Kategóriák HPA szabályozók és tartályok
Elérhetőség Elfogyott
Expedíció Jelenleg nincs raktáron ez a termék. Kattintson az Értesítés az elérhetőségről e-mailben lehetőségre, és értesítjük, amint az áru elérhetővé válik.
The MaxFlow HPA regulator can be used with any standard paintball HPA tank. The recommended input for the MaxFlow regulator (or the tank regulator output pressure) is 850 PSI. The regulator can work even with lower input pressure, but full and correct operation cannot be guaranteed. Do not use input pressure higher than 900 PSI.
The on/off and the pressure setting function is performed using an Allen screw located in the head of the regulator. By slowly screwing the Allen screw clockwise, the tank is opened and then the output pressure of the MaxFlow LP regulator starts to increase gradually. The regulator operates in the output pressure range of 0–225 PSI.
MaxFlow is equipped with an adjustable safety valve. To adjust it, unscrew the red cover nut counterclockwise. There is a setting screw under the red nut. Turning the screw clockwise increases the pressure limit at which the safety valve starts releasing the pressure.
Max Flow is not designed for CO2.
Súly: 240g
The MaxFlow HPA regulator can be used with any standard paintball HPA tank. The recommended input for the MaxFlow regulator (or the tank regulator output pressure) is 850 PSI. The regulator can work even with lower input pressure, but full and correct operation cannot be guaranteed. Do not use input pressure higher than 900 PSI.
The on/off and the pressure setting function is performed using an Allen screw located in the head of the regulator. By slowly screwing the Allen screw clockwise, the tank is opened and then the output pressure of the MaxFlow LP regulator starts to increase gradually. The regulator operates in the output pressure range of 0–225 PSI.
MaxFlow is equipped with an adjustable safety valve. To adjust it, unscrew the red cover nut counterclockwise. There is a setting screw under the red nut. Turning the screw clockwise increases the pressure limit at which the safety valve starts releasing the pressure.
Max Flow is not designed for CO2.
product_not_enough